Mineral Resources On-Line Spatial Data
Mineral Resources > Online Spatial Data > Geology > by state > Florida Geology
Geologic units in Charlotte county, Florida
- Undifferentiated sediments (Pleistocene/Holocene) at surface, covers 0.6 % of this area
Undifferentiated sediments - Undifferentiated Quaternary Sediments - Much of Florida's surface is covered by a varying thickness of undifferentiated sediments consisting of siliciclastics, organics and freshwater carbonates. Where these sediments exceed 20 feet (6.1 meters) thick, they were mapped as discrete units. In an effort to subdivide the undifferentiated sediments, those sediments occurring in flood plains were mapped as alluvial and flood plain deposits (Qal). Sediments showing surficial expression of beach ridges and dunes were mapped separately (Qbd) as were the sediments composing Trail Ridge (Qtr). Terrace sands were not mapped (refer to Healy  for a discussion of the terraces in Florida). The subdivisions of the Undifferentiated Quaternary Sediments (Qu) are not lithostratigraphic units but are utilized in order to facilitate a better understanding of the State's geology. The siliciclastics are light gray, tan, brown to black, unconsolidated to poorly consolidated, clean to clayey, silty, unfossiliferous, variably organic-bearing sands to blue green to olive green, poorly to moderately consolidated, sandy, silty clays. Gravel is occasionally present in the panhandle. Organics occur as plant debris, roots, disseminated organic matrix and beds of peat. Freshwater carbonates, often referred to as marls in the literature, are scattered over much of the State. In southern Florida, freshwater carbonates are nearly ubiquitous in the Everglades. These sediments are buff colored to tan, unconsolidated to poorly consolidated, fossiliferous carbonate muds. Sand, silt and clay may be present in limited quantities. These carbonates often contain organics. The dominant fossils in the freshwater carbonates are mollusks.
- Tamiami Formation (Pliocene) at surface, covers 1 % of this area
Tamiami Formation - The Tamiami Formation (Mansfield, 1939) is a poorly defined lithostratigraphic unit containing a wide range of mixed carbonate-siliciclastic lithologies and associated faunas (Missimer, 1992). It occurs at or near the land surface in Charlotte, Lee, Hendry, Collier and Monroe Counties in the southern peninsula. A number of named and unnamed members are recognized within the Tamiami Formation. These include: the Buckingham Limestone Member; an unnamed tan clay and sand; an oyster (Hyotissa) facies, a sand facies, the Ochopee Limestone Member, the Bonita Springs Marl Member; an unnamed limestone facies; the Golden Gate Reef Member; and the Pinecrest Sand Member (Missimer, 1992). The individual members of the Tamiami Formation were not separately mapped on the geological map. Lithologies of the Tamiami Formation in the mapped area include: 1) light gray to tan, unconsolidated, fine to coarse grained, fossiliferous sand; 2) light gray to green, poorly consolidated, fossiliferous sandy clay to clayey sand; 3) light gray, poorly consolidated, very fine to medium grained, calcareous, fossiliferous sand; 4) white to light gray, poorly consolidated, sandy, fossiliferous limestone; and 5) white to light gray, moderately to well indurated, sandy, fossiliferous limestone. Phosphate is present in virtually all lithologies as limited quantities of sand- to gravel-sized grains. Fossils present in the Tamiami occur as molds, casts and original material. The fossils present include barnacles, mollusks, corals, echinoids, foraminifers and calcareous nannoplankton. The Tamiami Formation has highly permeable to impermeable lithologies that form a complex aquifer. Locally, it is part of the surficial aquifer system. In other areas, it forms a part of the intermediate confining unit/aquifer system.
- Shelly sediments of Plio-Pleistocene age (Pliocene/Pleistocene) at surface, covers 10 % of this area
Shelly sediments of Plio-Pleistocene age - Tertiary-Quaternary Fossiliferous Sediments of Southern Florida - Molluskbearing sediments of southern Florida contain some of the most abundant and diverse fossil faunas in the world. The origin of these accumulations of fossil mollusks is imprecisely known (Allmon, 1992). The shell beds have attracted much attention due to the abundance and preservation of the fossils but the biostratigraphy and lithostratigraphy of the units has not been well defined (Scott, 1992). Scott and Wingard (1995) discussed the problems associated with biostratigraphy and lithostratigraphy of the Plio-Pleistocene in southern Florida. These "formations" are biostratigraphic units. The "formations" previously recognized within the latest Tertiary-Quaternary section of southern Florida include the latest Pliocene - early Pleistocene Caloosahatchee Formation, the early Pleistocene Bermont formation (informal) and the late Pleistocene Fort Thompson Formation. This section consists of fossiliferous sands and carbonates. The identification of these units is problematic unless the significant molluscan species are recognized. Often exposures are not extensive enough to facilitate the collection of representative faunal samples to properly discern the biostratigraphic identification of the formation. In an attempt to alleviate the inherent problems in the biostratigraphic recognition of lithostratigraphic units, Scott (1992) suggested grouping the latest Pliocene through late Pleistocene Caloosahatchee, Bermont and Fort Thompson Formations in to a single lithostratigraphic entity, the Okeechobee formation (informal). In mapping the shelly sands and carbonates, a generalized grouping as Tertiary-Quaternary shell units (TQsu) was utilized. This is equivalent to the informal Okeechobee formation. The distribution of the Caloosahatchee and Fort Thompson Formation are shown on previous geologic maps by Cooke (1945), Vernon and Puri (1964) and Brooks (1982). The Nashua Formation occurs within the Pliocene - Pleistocene in northern Florida. However, it crops out or is near the surface is an area too small to be shown on a map of this scale. Lithologically these sediments are complex, varying from unconsolidated, variably calcareous and fossiliferous quartz sands to well indurated, sandy, fossiliferous limestones (both marine and freshwater). Clayey sands and sandy clays are present. These sediments form part of the surficial aquifer system
- Hawthorn Group, Peace River Formation (Miocene/Pliocene) at surface, covers < 0.1 % of this area
Hawthorne Group, Peace River Formation - The Peace River Formation crops out or is beneath a thin overburden on the southern part of the Ocala Platform extending into the Okeechobee Basin. These sediments were mapped from Hillsborough County southward to Charlotte County. Within this area, the Peace River Formation is composed of interbedded sands, clays and carbonates. The sands are generally light gray to olive gray, poorly consolidated, clayey, variably dolomitic, very fine to medium grained and phosphatic. The clays are yellowish gray to olive gray, poorly to moderately consolidated, sandy, silty, phosphatic and dolomitic. The carbonates are usually dolostone in the outcrop area. The dolostones are light gray to yellowish gray, poorly to well indurated, variably sandy and clayey, and phosphatic. Opaline chert is often found in these sediments. The phosphate content of the Peace River Formation sands is frequently high enough to be economically mined. Fossil mollusks occur as reworked casts, molds, and limited original shell material. Silicified corals and wood, and vertebrate fossils are also present. The Peace River Formation is widespread in southern Florida. It is part of the intermediate confining unit/aquifer system.
- Holocene sediments (Holocene) at surface, covers 2 % of this area
Holocene sediments - the Holocene sediments in Florida occur near the present coastline at elevations generally less than 5 feet (1.5 meters). The sediments include quartz sands, carbonate sands and muds, and organics.