Dakota Formation widespread in western Iowa, lower sandstone-dominated Nishnabotna Member, upper mudstone/shale-dominated Woodbury Member. Correlative Windrow Formation found as erosional outliers in northeastern and north-central Iowa. Primary lithologies: sandstone, quartzose, very fine to medium grained; mudstone/shale, light to dark gray, variably silty-sandy, noncalcareous (Woodbury Mbr.). Secondary lithologies: sandstone, medium to very coarse grained, part pebbly to gravelly, locally cemented by iron oxides (Nishnabotna Mbr., Windrow Fm.), gravel, quartz and chert clasts; siltstone; mudstone, red, pink, yellow-brown, black (carbonaceous). Minor: lignite; siderite (concretions, pedogenic sphaerosiderite pellets, cemented siltstone); massive iron ore, silty to sandy (Windrow Fm.). Maximum thickness Dakota Fm. 500 ft (150 m), commonly 100-300 ft (30-90 m); Windrow Fm. 40 ft (12 m).
Lower Cherokee Group in southern, central, and western Iowa includes Kilbourn, Kalo, Floris formations (primarily Atokan-lower Desmoinesian, locally Morrowan at base); Raccoon Creek Group in eastern Iowa includes “Caseyville” and Tradewater formations (primarily Morrowan at most localities; locally includes Atokan-lower Desmoinesian Tradewater Formation in upper part). Primary Lithologies: shale/mudstone, light to dark gray, part silty to sandy; sandstone, very fine to medium grained; siltstone, gray. Secondary Lithologies: carbonaceous shale/mudstone, gray to black; phosphatic black shale; limestone, dense, part fossiliferous, part sandy; coal (beds locally > 2 ft). Minor: sandstone, coarse-grained to granular, part conglomeratic; mudstone, red to pink; limestone concretions (may be septarian); cone-in-cone limestone; siderite/ironstone concretions and pellets; pyrite. Maximum thicknesses Raccoon Creek Group in Muscatine-Scott counties: 230-250 ft (70-75 m). Maximum thicknesses Lower Cherokee Group across outcrop belt: 200-370 ft (60-113 m). Maximum thickness in southwest Iowa subsurface: 650 ft (200 m).
Interval includes Morgan School, Mouse Creek, Labette, Pawnee, Bandera, Altamont, Nowata, Lenapah, Memorial, Lost Branch formations. Primary Lithologies: shale/mudstone, light to dark gray; limestone, fossiliferous. Secondary Lithologies: mudstone, green-gray to red/maroon; shale, black, phosphatic; sandstone, very fine to medium grained. Minor: coal; siltstone, conglomerate. Maximum thicknesses: 125-175 ft (38-52 m).
Interval includes Verdigris and Swede Hollow formations; base of map unit drawn at the widespread Whitebreast Coal. Primary Lithologies: shale/mudstone, light to dark gray, part silty to sandy; siltstone, gray. Secondary Lithologies: limestone, part fossiliferous, part sandy; sandstone, very fine to fine-grained. Minor: mudstone, red/maroon to brown; shale, black, phosphatic; carbonaceous shale; coal (beds locally > 2 ft); ironstone/siderite concretions; limestone concretions (may be septarian); pyrite. Average thickness 100 ft (30 m); maximum thicknesses to 130 ft (40 m).
Interval includes Burlington, Keokuk, and Warsaw formations. Upper Warsaw strata locally preserved at top of interval in extreme southeast Iowa are lower Meramecian age . Primary Lithologies: dolomite, part argillaceous to shaly; dolomitic limestone, fossiliferous; fossiliferous limestone (especially crinoidal packstone-grainstone). Secondary Lithologies: glauconitic limestone/dolomite; shale, gray to green-gray, part dolomitic, part silty; chert, nodular to bedded. Minor: quartz crystals, quartz geodes, chalcedony; phosphatic dolomite/limestone (“bone bed”); siltstone, dolomitic. Lithologies noted only in northern Iowa: oolitic limestone; “sublithographic” limestone; dolomite/chert breccia. Interval is erosionally beveled beneath sub-“St. Louis” and sub-Pennsylvanian unconformities. Maximum thicknesses in northern Iowa: 85-105 ft (26-32 m). Maximum thicknesses in southern Iowa: 155-240 ft (47-73 m).
Interval includes lower Marble Valley Member, upper Humboldt Member; “Iowa Falls Dolomite” (dolomite facies); formation shares partial regional facies relationships with Burlington Formation; not present in southeastern Iowa. Primary Lithologies: limestone, primarily coated grain/oolitic to peloidal, variably fossiliferous to intraclastic. Secondary Lithologies: dolomite; dolomitic limestone; limestone, dense, “sublithographic.” Minor: shale, gray, calcareous; oncolitic limestone; glauconite; chert; breccia. Maximum thicknesses in northern Iowa 150-170 ft (45-52 m); interval thins to south and southeast 20-70 ft (6-21 m).
Shale and limestone. Shale is dark gray to light gray, greenish gray, black, red, silty, sandy carbonaceous, fissile, calcareous; contains scattered limestone nodules. Limestone is medium gray to light gray, red, mottled thin bedded to thick bedded, sandy, shaly, vuggy, fossiliferous. Approx. max thickness 125 ft
Upper part is white, light-gray, brownish-gray, yellow, redish-brown, and red sandstone and shale. Sandstone is very fine to coarse grained, friable, micaeous, crossbedded, and lenticular; locally contains gravel near base. contains numerous zones of ironstone and siltstone concretions of variable thickness. Middle part is light-gray, yellow, red brown and dark-gray, sandy carbonaceous shale; commonly contains a zone of concretions near top. Lower part is sandstone similar to that in upper except there are zones of siderite concretions and, locally a basal zone of chert pebbles. Approx. max thickness 600 ft.