Lower Cherokee Group in southern, central, and western Iowa includes Kilbourn, Kalo, Floris formations (primarily Atokan-lower Desmoinesian, locally Morrowan at base); Raccoon Creek Group in eastern Iowa includes “Caseyville” and Tradewater formations (primarily Morrowan at most localities; locally includes Atokan-lower Desmoinesian Tradewater Formation in upper part). Primary Lithologies: shale/mudstone, light to dark gray, part silty to sandy; sandstone, very fine to medium grained; siltstone, gray. Secondary Lithologies: carbonaceous shale/mudstone, gray to black; phosphatic black shale; limestone, dense, part fossiliferous, part sandy; coal (beds locally > 2 ft). Minor: sandstone, coarse-grained to granular, part conglomeratic; mudstone, red to pink; limestone concretions (may be septarian); cone-in-cone limestone; siderite/ironstone concretions and pellets; pyrite. Maximum thicknesses Raccoon Creek Group in Muscatine-Scott counties: 230-250 ft (70-75 m). Maximum thicknesses Lower Cherokee Group across outcrop belt: 200-370 ft (60-113 m). Maximum thickness in southwest Iowa subsurface: 650 ft (200 m).
Interval includes lower “St. Louis” (Meramecian) Croton and Yenruogis members; upper “St. Louis” (lower Genevievian) Verdi and Waugh members (interval does not correlate with type St. Louis of Missouri); Pella Fm (upper Genevievian); base includes Sonora Fm (Meramecian) in parts of southeast Iowa (Lee, Van Buren, Henry, Des Moines, Jefferson counties). Primary Lithologies: dolomite, part silty/sandy, part fossiliferous; limestone, part sandy to fossiliferous; part “sublithographic,” part argillaceous. Secondary Lithologies: dolomite/limestone breccia; shale/marl, green-gray, calcareous; sandstone, fine to medium-grained; siltstone; gypsum/anhydrite (south-central Iowa). Minor: limestone, oolitic; shale, gray; shale, red to pink; chert/chalcedony. Croton Member contains gypsum-anhydrite in subsurface outside of outcrop belt. Interval is erosionally beveled to locally absent beneath Pcl; Pella Formation absent over broader areas. Maximum thicknesses for total interval 60-150 ft (18-45 m); maximum thickness Pella Formation 75 ft (23 m); maximum thickness “St. Louis” Formation 75 ft (23 m); maximum thickness Sonora Formation 35 ft (11 m).
Interval includes Verdigris and Swede Hollow formations; base of map unit drawn at the widespread Whitebreast Coal. Primary Lithologies: shale/mudstone, light to dark gray, part silty to sandy; siltstone, gray. Secondary Lithologies: limestone, part fossiliferous, part sandy; sandstone, very fine to fine-grained. Minor: mudstone, red/maroon to brown; shale, black, phosphatic; carbonaceous shale; coal (beds locally > 2 ft); ironstone/siderite concretions; limestone concretions (may be septarian); pyrite. Average thickness 100 ft (30 m); maximum thicknesses to 130 ft (40 m).