Geologic units in Rogers county, Oklahoma

Additional scientific data in this geographic area

Senora Formation (Middle Pennsylvanian) at surface, covers 29 % of this area

TULSA- Shale with thin and lenticular sandstone, minor limestone, and coal. OKLAHOMA CITY- Mainly fine-grained micaceous sandstone and shale locally containing coal beds. Thickness ranges from about 500 to 950 feet. FORT SMITH- Shale, sandstone, and thin coal seams. ARDMORE-SHERMAN- Shale, gray, and light-brown medium-grained sandstone; thickness, 150 to 500 feet, decreasing southwestward. Subdivided into lower sandstone, 350 feet thick, and upper shale, 150 feet thick.

Boggy Formation (Middle Pennsylvanian) at surface, covers 20 % of this area

TULSA- Shale, sandstone, and coal. FORT SMITH- Shale, sandstone, and coal; includes Bluejacket Sandstone Member at base. ARDMORE-SHERMAN- Shale and sandstone, blue-gray to brown, fine- to coarse- grained, with some thin limestone lenses and a coal bed 2.5 feet thick about 400 feet above base. Thickness, 1,250 to 2,800 feet. "Bluejacket Sandstone," IPbj, at base, 8 to 12 feet thick, with 2-foot "Secor coal" 50 feet above top of Bluejacket. (Lower Franks Conglomerate) McALESTER TEXARKANA- Shale, brown, to blue-gray, illitic, chloritic, with many sandstones, fine- to coarse-grained, micaceous, quartzose, moderately to well-indurated, with "Secor coal" about 50 feet above base; thickness, 2,140 to 4,000 feet, increasing eastward.

Oolagah Formation (Middle Pennsylvanian) at surface, covers 11 % of this area

TULSA- Thin-bedded limestone and some shale in the southern part of the area. North of Oolagah, in western Rogers County, the map unit, IPol, includes the following formations: "Altamont Formation," limestone and minor shale; "Bandera Formation," shale and thin sandstone; "Pawnee Formation," limestone and minor shale.

Alluvium (Holocene) at surface, covers 10 % of this area

WOODWARD- Lenticular and interfingering deposits of gravel, sand, silt, and clay. Generally light-tan to gray. Thickness along major streams ranges up to 100 feet and probably averages 40 feet; along minor streams the thickness ranges up to 45 feet and probably averages 20 feet. ENID- Sand, silt, clay, and locally gravel. Maximum thickness ranges from 30 to 80 feet (9 to 24 m) along major streams and from 0 to 60 feet (0 to 18 m) along minor streams. TULSA- Gravel, sand, silt, and clay. TULSA- Gravel, sand, silt, and clay. OKLAHOMA CITY- Sand, silt, clay, and lenticular beds of gravel. Thickness ranges from about 30 to 100 feet and probably averages about 50 feet along major streams. Along minor streams, thickness ranges from a few feet to about 50 feet and probably averages about 25 feet. LAWTON- Sand, clay, and gravel as much as 50 feet (15 m) thick; Shown only along major streams and tributaries. ARDMORE-SHERMAN- Gravel, sand, silt, and clay, including low terraces; thickness, about 25 to 100 feet. McALESTER TEXARKANA- Gravel, sand, silt, and clay, including low terraces about 30 feet above channels; thickness, about 50 feet along Little River and 110 feet along Red River.

Seminole Formation (Middle Pennsylvanian) at surface, covers 9 % of this area

TULSA- Shale, sandstone, and thin coal beds. OKLAHOMA CITY- Chert conglomerate, shale, and fine-grained sandstone containing coal seams in upper part locally. Thickness ranges from 100 to 375 feet. FORT SMITH- Sandy shale, sandstone, and thin coal seams. ARDMORE-SHERMAN- Shale, gray-green, with buff fine-grained sandstones, chert conglomerates, and limy sandstones; thickness, about 120 feet. (Upper Franks Conglomerate).

Nowata Formation (Middle Pennsylvanian) at surface, covers 4 % of this area

TULSA- Shale and minor sandstone and limestone.

Labette Formation (Middle Pennsylvanian) at surface, covers 3 % of this area

TULSA- Shale and thin sandstone and limestone.

Terrace Deposits (Pleistocene) at surface, covers 3 % of this area

WOODWARD- Lenticular and interfingering deposits of light-tan to gray gravel, sand, silt, clay, and volcanic ash. Sand dunes are common in many places. Thickness ranges up to 150 feet and averages about 60 feet. ENID- Sand, silt, clay, and gravel. Maximum thickness, about 75 feet (23 m) along major streams. TULSA- Fine gravel, sand, silt, and clay. CLINTON- Stream-laid deposits of sand, silt, clay, gravel, and volcanic ash; thickness ranges from 0 to about 120 feet. OKLAHOMA CITY- Lenticular beds of sand, silt, clay, and gravel. Thickness ranges from a few feet to about 100 feet and probably averages about 50 feet along major streams. FORT SMITH- Gravel, sand, silt, and clay. LAWTON- Sand, clay, and gravel as much as 75 feet (23 m) in Tillman County, ranging from 5 to 50 feet (2 to 15 m) elsewhere. ARDMORE-SHERMAN- Gravel, sand, silt, clay, and volcanic ash; thickness, about 5 to 50 feet; at various levels, as high as 160 feet above present flood plains. McALESTER TEXARKANA- Gravel, sand, silt, clay, and volcanic ash; several levels 20 to 160 feet or more above present flood plains, with each level containing deposits that average 20 to 30 feet in thickness, some windblown sand on top; may include colluvial wash down sides of hills.

Fort Scott Limestone (Middle Pennsylvanian) at surface, covers 3 % of this area

TULSA- Limestone and shale. (Mapped with the Labette Formation south of Bird Creek inTulsa County).

Savanna Formation (Middle Pennsylvanian) at surface, covers 3 % of this area

TULSA- "Savanna Formation," shale and thin sandstone, limestone, and coal. FORT SMITH- IPsa "Savanna Formation," shale, sandstone, and coal ARDMORE-SHERMAN- Sandstone and shale, gray to brown, fine- to coarse-grained, cherty, with several thin coal seams near middle; thickness, 1,120 to 1,600 feet (Lower Franks Conglomerate) McALESTER TEXARKANA- Shale, tan to brown, illitic, chloritic, and sandstone, fine-to coarse-grained, micaceous, quartzose, with several thin coal seams in middle, one of which is "Cavanal coal;" thickness, 1,470 to 2,000 feet, increasing eastward.

Savanna + McAlester + Hartshorne Formations (Middle Pennsylvanian) at surface, covers 3 % of this area

TULSA- "Savanna, McAlester, and Hartshorne Formations," shale and some sandstone, limestone, and coal.

Coffeyville and Checkerboard Formations or Checkerboard Limestone (Middle Pennsylvanian) at surface, covers 3 % of this area

ENID- "Coffeyville Formation" is mainly shale interbedded with fine-to medium-grained sandstone. Locally formation contains thin coal seams. Thickness ranges from 175 to 470 feet (50 to 140 m). Underlying "Checkerboard Limestone" is crystalline limestone 2 to 15 feet (1 to 5 m) thick. TULSA- "Coffeyville Formation," shale and thin-bedded sandstone. "Checkerboard Formation," limestone and some shale. OKLAHOMA CITY- "Coffeyville Formation," mainly shale interbedded with fine- to medium-grained sandstone locally containing chert and limestone conglomerate and thin coal seams; thickness, 150 to 470 feet. Underlying "Checkerboard Limestone," crystalline limestone 2.5 to 5 feet thick.

McAlester and Hartshorne Formations (Middle Pennsylvanian) at surface, covers < 0.1 % of this area

TULSA- "McAlester and Hartshorne Formations", shale and some sandstone and coal. FORT SMITH- IPmh "McAlester" and "Hartshorne Formations" (undifferentiated), shale, sandstone, and coal.