Geologic units in McMinn county, Tennessee

Additional scientific data in this geographic area

Nolichucky Shale, and Maryville, Rogersville, and Rutledge Formations, and Pumpkin Valley Shale (Cambrian) at surface, covers 23 % of this area

(Cn) Nolichucky Shale - Pastel-colored (pink, greenish, olive), flaky clay shale; gray, commonly oolitic, shaly limestone lenses; locally stromatolitic limestone layers; thin, blocky siltstone near middle. Thickness 500 feet in the east to 900 feet in the west.; (Cmr) Maryville, Rogersville, and Rutledge Formations - Maryvile and Rutledge are gray limestone, in part oolitic, with gray dolomite locally. Rogersville is green clay shale. Thickness 400 to 1,000 feet. Pumpkin Valley Shale - Dull-brown to maroon shale with numerous interbeds of thin, blocky, sandy siltstone. Thickness 100 to 600 feet.

Unnamed (upper part of Knox Group), including Newala Formation, Mascot Dolomite, Kingsport Formation, Longview Dolomite, and Chepultepec Dolomite (Ordovician) at surface, covers 21 % of this area

(Onc) Unnamed (upper part of the Knox Group), including the (On) Newala Formation; (Oma) Mascot Dolomite - Light-gray, fine-grained, well-bedded cherty dolomite; mottled (red and green) dolomite characteristic; interbeds of bluish-gray limestone in upper part; chert-matrix quartz sandstone at base. Erosional unconformity at top. Thickness 350 to 800 feet; (Ok) Kingsport Formation - Gray, fine-grained, sparingly cherty dolomite with basal dense, gray limestone sequence. Thickness about 250 feet. and (Olc) Unnamed (middle part of the Knox Group), including (Olv) Longview Dolomite - Siliceous, gray, fine-grained, medium-bedded dolomite; interbeds of gray limestone in upper part. Thickness about 300 feet; (Oc) Chepultepec Dolomite - Light-gray, fine-grained, well-bedded dolomite, moderately cherty; fine-grained limestone locally in upper part; quartz sandstone beds at base. Average thickness about 800 feet.

Knox Group, including Newala Formation, Mascot Dolomite, Kingsport Formation, Longview Dolomite, Chepultepec Dolomite, and Copper Ridge Dolomite (Ordovician to Cambrian) at surface, covers 15 % of this area

Siliceous dolomite and magnesian limestone sequence. Thickness 2,500 to 3,000 feet.

Copper Ridge Dolomite (Cambrian) at surface, covers 10 % of this area

Coarse, dark-gray, knotty dolomite, asphaltic in places, with much gray, medium-grained, well- bedded dolomite; abundant chert; cryptozoans typical. Thickness about 1,000 feet.

Athens Shale (Ordovician) at surface, covers 9 % of this area

Medium- to dark-gray, calcareous, graptolitic shale; calcareous gray sandstone, siltstone, and locally fine-pebble quartz conglomerate; nodules of shaly limestone near base. Maximum thickness 1,500 feet.

Ottosee Shale (Ordovician) at surface, covers 5 % of this area

Bluish-gray calcareous shale, weathers yellow; with reef lenses of coarsely crystalline reddish fossiliferous limestone ("marble"). Thickness about 1,000 feet.

Rome Formation (Cambrian) at surface, covers 3 % of this area

Variegated (red, green, yellow) shale and siltstone with beds of gray, fine-grained sandstone. Maximum exposed thickness 1,500 feet.

Copper Ridge Dolomite (Ordovician) at surface, covers 3 % of this area

Coarse, dark-gray, knotty dolomite, asphaltic in places; with much gray, medium-grained, well- bedded dolomite; abundant chert; cryptozoans typical. Thickness about 1,000 feet.

Maynardville Limestone (Cambrian) at surface, covers 3 % of this area

Thick-bedded, bluish-gray, ribboned (silt and dolomite), nodular limestone; light-gray, fine- grained, laminated to thin-bedded, noncherty dolomite in upper part. Thickness 150 to 400 feet.

Holston Formation (Ordovician) at surface, covers 2 % of this area

Pink, gray, and red coarsely crystalline limestone (Holston Marble); in many areas upper part is sandy, crossbedded ferruginous limestone and brown to greenish calcareous shale. Thickness 200 to 600 feet.

Conasauga Group, including Maynardville Limestone, Nolichucky Shale, the Maryville, Rogersville, and Rutledge Formations, Pumpkin Valley Shale, Rome Formation, and Shady Dolomite (Cambrian) at surface, covers 2 % of this area

Conasauga Group - Mostly shale northwest of a line connecting Etowah and Bearden (Knoxville); to the east it consists of the six formations at right [Cmn, Maynardville Limestone. Ccl including Cn, Nolichucky Shale, Cmr Maryville, Rogersville, and Rutledge Formations, and Pumpkin Valley Shale; Cr, Rome Formation, and Cs, Shady Dolomite. Thickness about 2,000 feet.

Chickamauga Group, includes Upper part of Chickamauga Group (Reedsville Shale, and Unnamed limestone unit) and Middle and Lower part of Chickamauga Group (Moccasin Formation, Bays Formation, Ottosee Shale, Holston Formation, Lenoir Limestone, Athens Shale, and Sevier Shale) (Ordovician) at surface, covers 1 % of this area

In the northwest part of the Valley and Ridge a predominantly limestone sequence about 2,000 feet thick. Becomes progressively more clastic and thicker to the southeast, including Upper part of Chickamauga Group (Reedsville Shale- Greenish-gray calcareous shale. Thickness 0 to 400 feet, and Unnamed Limestone Unit - Medium-grained, fossiliferous, gray limestone, shaly in part. Thickness as much as 600 feet ) and.Middle and lower parts of Chickamauga Group (Omlc).

Lenoir Limestone (Ordovician) at surface, covers 1 % of this area

Nodular, argillaceous, gray limestone; in places basal sedimentary breccia, conglomerate, quartz sand; Mosheim Limestone Member (dense, light- to medium-gray limestone) near base. Thickness 25 to 500 feet.

Chilhowee Group; Cochran Conglomerate (Cambrian) at surface, covers 0.7 % of this area

Quartz-pebble conglomerate, gray pebbly arkose, siltstone and shale; irregular bedding, scour features, crossbedding common; maroon micaceous arkose and shale near middle and base. Thickness about 1,200 feet.

Walden Creek Group; Sandsuck Formation (Precambrian) at surface, covers 0.6 % of this area

Olive-green and gray, argillaceous, micaceous shale with coarse feldspathic sandstone and quartz- pebble conglomerate. Thickness about 2,000 feet.

Maynardville Limestone (Cambrian) at surface, covers 0.6 % of this area

Thick-bedded, bluish-gray, ribboned (silt and dolomite) nodular limestone; light-gray, fine-grained, laminated to thinly bedded, noncherty dolomite in upper part. Thickness 150 to 400 feet.

Nichols Shale (Cambrian) at surface, covers 0.4 % of this area

Olive-gray to green, silty and sandy, micaceous shale and siltstone; local lenses of fine-grained feldspathic quartzite. Thickness about 700 feet.

Shady Dolomite (Cambrian) at surface, covers 0.1 % of this area

Light-gray dolomite and thinly bedded limestone with much shaly gray limestone and calcareous gray shale. Thickness about 1,000 feet.

Chilhowee Group; Nebo Sandstone (Cambrian) at surface, covers 0.1 % of this area

Medium-bedded, fine-grained, white vitreous quartzite, in part feldspathic. Thickness 250 feet.

Chilhowee Group; Hesse Sandstone (Cambrian) at surface, covers < 0.1 % of this area

White, vitreous quartzite, medium- to coarse-grained, occurs in massive ledges; Helenmode Member at top is gray to greenish sandstone and shale. Thickness about 600 feet.

Chilhowee Group; Murray Shale (Cambrian) at surface, covers < 0.1 % of this area

Shale, silty, sandy, dull-green to brown, micaceous. Thickness about 500 feet.