Elbrook Formation (Stose, 1906). Dolostone and limestone with lesser shale and siltstone. Dolostone, medium-to dark-gray, fine- to medium-grained, laminated to thick-bedded. Limestone, dark-gray, fine-grained, thin- to medium-bedded, with algal structures and sharpstone conglomerate. Shale and siltstone, light- to dark-gray, dolomitic, platy weathering, with minor grayish-red or olive-green shales. Interbedded limestone and dolostone dominate the upper part of the formation; dolomitic siltstone and shale and thin- bedded argillaceous limestone dominate the lower part. The formation ranges be tween 1500 and 2900 feet in thickness in the southeasternmost exposures but is incomplete elsewhere due to faulting. The Elbrook of northern Virginia is transitional with the Nolichucky and Honaker Formations (locally the limestone facies of the Nolichucky has been differentiated from the Elbrook by Bartlett and Biggs (1980). It is also approximately equivalent to the rock sequence comprised of the Nolichucky and Maryville Formations, the Rogersville Shale, and the Rutledge Formation. Farther southwest the Conasauga Shale is the Elbrook equivalent. The Elbrook appears to be conformable and gradational with the underlying Waynesboro or Rome Formations. From Washington County to Augusta County much of the Elbrook Formation adjacent to the Pulaski and Staunton faults is a breccia of the "Max Meadows tecontic breccia type" (Cooper and Haff, 1940). These breccias are composed of crushed rock clasts that range from sand size to blocks many feet long, derived almost entirely from the lower part of the Elbrook Formation. The breccia commonly forms low lands characterized by karst features.